How to Create a Complete Virtual Environment for Penetration Testing (PART- 1)

Creating a lab for testing is one of the important aspects of becoming a professional pentester (E-Hacker). I was creating a new Virtual Lab to my new System and I thought it would be beneficial if I share the steps here in the community.

The tutorial series will have 6 parts that will include setting up multiple virtual boxes for different OS systems connected them using PFsense.(Routing Software).

Tutorial Series will include:

1- Configuring Pfsense for the routing and firewall

2- Windows R2012 server

3- Ubuntu

4-Mac OS X(Yosimite)

5- Windows 10

6- windows 8

7- Configuring Pfsense for routing and firewall

Let’s start !!!

1- Configuring Pfsense for the routing and firewall

Requirements:

– Virtualbox

– Pfsense ISO

– Winrar or 7-zip (extraction)

Pfsense: is a free software that will provide the routing and firewall inside the virtual machine

Link: https://www.pfsense.org/download/?section=downloads

Tutorial Guideline :

– Downloading

– Extracting the ISO

– Installing Pfsense on the  (Virtualbox Machine)

– Configuring the settings

1- Downloading the Software

– Choose Install 2.2.6 (version)

-Select i386 (32-bit) from the drop-down menu of Computer Architecture

– Choose the platform as ( Live CD with Installer )

– Choose one of the mirrored images. For this tutorial I chose the hosting by NYI,

NOTE :The file will be in the format of iso.gz (Linux compression format)

2- Extracting the ISO:

There are multiple extraction tool that can be used to the extract (gz) compressed files. I usually use winrar as it is very common compressor utility for Windows

Examples: Winrar, zip, 7-zip

3-  Installing Pfsense on the virtual machine :

– Create a virtual machine for the PfSense:

– For the machine settings, there are not many setting to configure for the Pfsense box. The main focus is on adding two adapters to our machine one is bridged and other is internal.

4- Configuring the settings

– Start the virtual a machine, and wait for it to load . It would take a minute or two to take you to the main menu .

– Once the main menu is loaded, type 99 to move to the (Configuration Console)

–  Choose (Accept these settings) option and click enter.

– Choose Quick and Easy Install and click enter.

– Choose Ok and click enter

– It would take a little time to finish the installation about 2-3 minutes.

– In install Kernel step, choose Standard Kernel and Click enter.

– Click on Reboot

NOTE: When rebooting, remove the CD drive quickly, otherwise it is going to load  back to the installation menu and you have to do the steps again.

– To remove the CD. Click on Device , and remove disk from virtual box

– After the reboot, It should take you to the main menu again. This time you should see the WAN address set up and ready to go. However, we still need to setup the LAN IP address. In order to do so, type number 2 from the menu (Assign Interfaces) .

– Then type (2) to choose LAN interface.

For the LAN IPV4, I choose 10.0.0.1 as the Pfsesne IP

Enter 24  for  (new LAN IPV4 subnet bit count ) as shown below.

– Hit ENTER for the next step.

– Hit another ENTER  for  (new LAN IPV6 )

– Type (y) for the question “Do you want to enabe the DHCP server on LAN ?”

– Enter the start address : 10.0.0.5

– Enter the end address :10.0.0.15

– Type “Y” again to setup webconfigurator

– Login in to the PFsense  page

Open another Virtualbox machine to access the router Page. The virtual machine has to be set on Internal Network (Adapater) to be able to communicate through the Pfsense firewall.

I used win 10 virtual machine .

Go to the browser and type the link that you have given after configuring the PFsense. In this case, it is http://10.0.0.1/ , you will be greeted with the login page of PFsense

Username: admin

password: pfsense

The wizard will start setting up the environment .

For the primary DNS IP, type the IP address of your router NOT the PFSENSE address. Here is 192.168.1.1 in order to get Internet connection to your box.

– Click next  multiple times then Reload. (you do not need to change anything else.

– Once you get to the dashboard , you should have the settings setup similar to the below picture

NOTES:

Important things to look for in the pfsense configuration:

LAN IP is the the same IP address of the pfsense

Primary DNS server IP should be your router IP

For testing Ping 10.0.0.1 OR goog.com (YOU should be able to get reply by this point)

That’s all for this tutorial. Next will go through how to setup windows R 2012.